(Official January 1, 2007)

0.001 M Ammonium edetate— Transfer 293 mg of edetic acid, accurately weighed, to a 1000-mL volumetric flask, add 1 mL of methanol and 7 mL of ammonium hydroxide, and shake to dissolve the edetic acid. Add 900 mL of water, adjust with glacial acetic acid to a pH of 6.6, dilute with water to volume, and mix.

Mobile phase— Prepare a solution of 0.001 M Ammonium edetate and tetrahydrofuran (85:15). Filter and degas the solution before use.

Standard preparation— Transfer 36 mg of USP Meclocycline Sulfosalicylate RS, accurately weighed, to a 50-mL volumetric flask, dilute with methanol to volume, and mix. Transfer 3.0 mL of this solution to a 25-mL volumetric flask, dilute with Mobile phase to volume, and mix to obtain a solution having a known concentration of about 60 µg of meclocycline per mL.

Assay preparation— Using 36 mg of Meclocycline Sulfosalicylate, accurately weighed, prepare as directed for Standard preparation.

Procedure— Introduce equal volumes (about 10 µL) of the Assay preparation and the Standard preparation into a high-pressure liquid chromatograph (see Chromatography 621), operated at room temperature, by means of a suitable microsyringe or sampling valve, adjusting the specimen size and other operating parameters such that the peak obtained from the Standard preparation is about 0.6 full-scale. Typically, the apparatus is fitted with a 25-cm × 4-mm column packed with packing L1 and is equipped with an UV detector capable of monitoring absorption at 340 nm, and a suitable recorder. In a suitable chromatogram the coefficient of variation for replicate injections of the Standard preparation is not more than 3.0%. Measure the peak responses at equivalent retention times, obtained from the Assay preparation and the Standard preparation, and calculate the quantity, in mg, of C22H21ClN2O8 in the portion of Meclocycline Sulfosalicylate taken by the formula: in which C is the equivalent, in µg per mL, of meclocycline from the USP Meclocycline Sulfosalicylate RS in the Standard preparation; and rU and rS are the peak responses obtained from the Assay preparation and the Standard preparation, respectively.