Packaging and storage
Preserve in tight containers.
Insoluble substances
Dissolve 10 g in 100 mL of hot water, filter through a tared filtering crucible, wash the insoluble residue with hot water, and dry at 105
for 2 hours: the residue does not exceed 20 mg (0.2%).
Lead
A solution of 1 g in 20 mL of water contains not more than 5 µg of lead (corresponding to not more than 5 ppm of Pb) when tested as directed in the test for
Lead 251.
Limit of fluoride
Proceed as directed in the test for Fluoride under Dibasic Calcium Phosphate. The limit is 0.001%.
Assay
Transfer about 5 g of Monobasic Potassium Phosphate, previously dried and accurately weighed, to a 250-mL beaker, add 100 mL of water and 5.0 mL of 1 N hydrochloric acid VS, and stir until the assay specimen is completely dissolved. Place the electrodes of a suitable pH meter in the solution, and slowly titrate the excess acid, stirring constantly, with 1 N sodium hydroxide VS to the inflection point occurring at about pH 4. Record the buret reading, and calculate the volume (
A), if any, of 1 N hydrochloric acid consumed by the assay specimen. Continue the titration with 1 N sodium hydroxide VS until the inflection point occurring at about pH 8.8 is reached, record the buret reading, and calculate the volume (
B) of 1 N sodium hydroxide required in the titration between the two inflection points (pH 4 and 8.8). Each mL of the volume (
B A) of 1 N sodium hydroxide is equivalent to 136.1 mg of KH
2PO
4.