Search USP29  
Dibucaine Ointment
» Dibucaine Ointment contains not less than 90.0 percent and not more than 110.0 percent of the labeled amount of dibucaine (C20H29N3O2) in a suitable ointment base.
Packaging and storage— Preserve in collapsible tubes or in tight, light-resistant containers.
Change to read:
Identification— The retention time of the major peak in the chromatogram of the Assay preparation corresponds to that in the chromatogram of the Standard preparation, as obtained in the Assay.USP29
Microbial limits 61 It meets the requirements of the tests for absence of Staphylococcus aureus and Pseudomonas aeruginosa.
Minimum fill 755: meets the requirements.
Residual solvents 467: meets the requirements.
(Official January 1, 2007)
Mobile phase and Chromatographic system— Proceed as directed in the Assay under Dibucaine.
Standard preparation— Transfer about 55 mg of USP Dibucaine Hydrochloride RS, accurately weighed, to a 50-mL volumetric flask, add 24.0 mL of 0.1 N hydrochloric acid, and swirl to dissolve. Dilute with a mixture of methanol and 1.0 N hydrochloric acid (13:12) to volume, and mix. Transfer 10.0 mL of this solution to a 50-mL volumetric flask, dilute with methanol to volume, and mix. Pass through a suitable filter having a 0.5-µm or finer porosity.
Assay preparation— Weigh accurately a portion of Ointment, equivalent to about 50 mg of dibucaine, transfer to a separator containing 50 mL of ether, and mix to dissolve. Extract successively with 50-mL, 40-mL, and 30-mL portions of 0.1 N hydrochloric acid, combining the extracts in a 250-mL volumetric flask. Dilute with methanol to volume, and mix. Pass through a suitable filter having a 0.5-µm or finer porosity.
Procedure— Separately inject equal volumes (about 10 µL) of the Standard preparation and the Assay preparation into the chromatograph, record the chromatograms, and measure the area responses for the major peaks. Calculate the quantity, in mg, of dibucaine (C20H29N3O2) in the portion of Ointment taken by the formula:
(343.46/379.93)(250C)(rU / rS)
in which 343.46 and 379.93 are the molecular weights of dibucaine and dibucaine hydrochloride, respectively; C is the concentration, in mg per mL, of USP Dibucaine Hydrochloride RS in the Standard preparation; and rU and rS are the area responses of the dibucaine peaks obtained from the Assay preparation and the Standard preparation, respectively.
Auxiliary Information— Staff Liaison : Daniel K. Bempong, Ph.D., Scientist
Expert Committee : (MDPS05) Monograph Development-Pulmonary and Steroids
USP29–NF24 Page 679
Pharmacopeial Forum : Volume No. 31(2) Page 400
Phone Number : 1-301-816-8143